Multispan MHC-1202 Humidity Controller
Digital humidity controller with 2 relays and RS-485 Modbus
A panel-mount humidity controller from Multispan. It reads an RH-100 humidity sensor and switches a humidifier and a dehumidifier through 2 relays, with RS-485 Modbus for your PLC or SCADA.
- Humidity sensor input: RH-100, 0.0–100.0 % RH (PT-100 temperature input 0.0–400.0 °C)
- 2 relay outputs (1 C/O, on-off) for humidification and dehumidification
- RS-485 Modbus for PLC / SCADA
- Analog retransmission output
- Dual display: red 0.56" process value, white 0.56" set value
- Front IP-65, 100–270 V AC supply
About the MHC-1202
The Multispan MHC-1202 is a 96 × 96 mm digital humidity controller. It reads an RH-100 humidity sensor (0.0–100.0 % RH) and switches your humidifier and dehumidifier through two on-off relays.
A red display shows the measured value and a white display shows the set value, so it is easy to read on a control panel. RS-485 Modbus and an analog retransmission output let you connect it to a PLC, SCADA or data logger.
Contol-X supplies Multispan controllers as a dealer — on their own, or wired into a control panel together with your grow room, store or process equipment. Other models: MHC-1101 (1 relay, 96 × 96 mm) and MHC-512 (2 relays, compact 37 × 78 mm).
Features
- Humidity sensor input: RH-100, 0.0–100.0 % RH (PT-100 temperature input 0.0–400.0 °C)
- 2 relay outputs (1 C/O, on-off) for humidification and dehumidification
- RS-485 Modbus for PLC / SCADA
- Analog retransmission output
- Dual display: red 0.56" process value, white 0.56" set value
- Front IP-65, 100–270 V AC supply
Technical specifications
| Model | MHC-1202 |
|---|---|
| Input | Humidity sensor RH-100 (0.0–100.0 % RH); PT-100 (0.0–400.0 °C) |
| Output | 2 relays, 1 C/O (on-off) |
| Communication | RS-485 Modbus |
| Retransmission | Analog output |
| Display | Upper red 7-segment 0.56" (process value), lower white 7-segment 0.56" (set value) |
| Size | 96 (H) × 96 (W) × 54 (D) mm |
| Panel cut-out | 92 × 92 mm |
| Supply | 100–270 V AC, 50/60 Hz, approx. 4 VA |
| Protection | IP-65 front (IS/IEC 60529:2001) |
| Other models | MHC-1101-A2-02 (1 relay, 96 × 96 × 54 mm), MHC-512-A2-00 (2 relays, 37 × 78 × 70 mm) |
| Brand | Multispan (India) |
Where it is used
- Mushroom grow rooms and spawn labs — humidifier / dehumidifier control
- Cold stores and ripening rooms
- Poultry hatcheries and incubators
- Greenhouses and polyhouses
- Industrial drying and process rooms
Frequently asked questions
Can the MHC-1202 run a humidifier and a dehumidifier?
Yes. It has two relay outputs, one for humidification and one for dehumidification.
Which humidity sensor does it use?
The RH-100 humidity sensor, with a range of 0.0 to 100.0 % RH.
Can it connect to a PLC or SCADA?
Yes. It has RS-485 Modbus and an analog retransmission output.
What panel cut-out does it need?
92 × 92 mm. The controller is 96 × 96 mm on the front and 54 mm deep.
What is the price?
Price on request — send us a WhatsApp message with the quantity and we reply with a quotation.
Let’s automate your farm
Tell us about your rooms and equipment — we reply within 24 hours with the right setup and a quotation. India and worldwide.

