CX700 Phase 2 Compost Tunnel Controller
Compact Phase II controller with OLED display, knob and phone app
Compact Phase II compost tunnel controller: 7-stage automatic cycle, five temperature sensors, fan VFD and dampers. Compost temperature, fan speed and damper position on the OLED display; control from the app over WiFi.
- 7-stage automatic cycle that advances when the compost reaches target
- Five temperature sensors with sensor fail-safe fallback chain
- Works with any compatible VFD (variable speed fan drive)
- Fresh-air and recirculation damper control
- Twelve alarms; power-cut recovery
- OLED display with navigation knob and BACK / OK buttons
About the CX700
CX700 runs the full Phase II cycle on its own: leveling, heat-up, pasteurization, conditioning and cool-down. It reads five temperature sensors, steers the fan and the fresh-air and recirculation dampers, and keeps going through power cuts.
Compost temperature, fan speed and damper position show on the front OLED display with a navigation knob, and you run it from your phone or computer over WiFi and the Contol-X cloud.
Features
- 7-stage automatic cycle that advances when the compost reaches target
- Five temperature sensors with sensor fail-safe fallback chain
- Works with any compatible VFD (variable speed fan drive)
- Fresh-air and recirculation damper control
- Twelve alarms; power-cut recovery
- OLED display with navigation knob and BACK / OK buttons
- Phone app, desktop and web over WiFi
- Leveling: the fan circulates until air-in and air-out temperatures even out
- Heat-up: fan speed is trimmed to hold a steady climb towards 58 °C
- Pasteurize: hold timer (6 h by default) runs only while both compost probes are at target
- Condition: controlled ramp-down, then a long hold for ammonia clearance
- Cool-down: fresh air brings the compost down to room temperature at a steady rate
- Done: fan and damper park — compost is ready for spawning
Technical specifications
| Model | CX700 |
|---|---|
| Controller | Contol-X Phase 2 mushroom compost controller |
| Operating temperature | 0 to 35–40 °C |
| Temperature inputs | 5 × temperature sensors |
| Damper actuator | Fresh-air and recirculation damper control |
| Fan drive | Any compatible VFD |
| Operator panel | OLED display with navigation knob and BACK / OK buttons |
| Network | WiFi connectivity |
| Cloud | Android / iOS · Desktop · Web |
| Configuration | 7 stages × 12 setpoints, alarm limits, probe calibration — stored in flash |
| Warranty | 1-year Contol-X warranty |
What's included
- CX700 controller
Where it is used
- Mushroom compost Phase II tunnels
- Smaller compost units
Frequently asked questions
How does the controller know when to move to the next stage?
It moves on when the compost actually reaches the target temperature — not after a fixed clock time. Every target, duration and ramp rate is a factory default you can change per tunnel.
What happens if a temperature probe breaks?
A broken probe never stops the batch. Each probe is checked for open or shorted wiring every half second and control moves down a fallback chain automatically.
What happens after a power cut?
The stage, elapsed time, hold timers and all settings are saved. When power returns the controller restores the stage, restarts the fan and damper and continues the countdown.
Can I run it from my phone?
Yes. The Contol-X app shows every probe, the stage and the hold countdown, and lets you start, stop, hold or move to the next stage and edit setpoints.
Do you supply outside India?
Yes. Contol-X controllers are shipped worldwide, with remote setup support over video call and WhatsApp.
Related controllers
Let’s automate your farm
Tell us about your rooms and equipment — we reply within 24 hours with the right setup and a quotation. India and worldwide.


