CX710 Phase 2 Compost Tunnel Controller
Automatic Phase II cycle with a display panel, run from your phone over WiFi
Phase II compost tunnel controller with a 7-stage automatic cycle, five temperature sensors, fan VFD and fresh-air / recirculation dampers. Live readings on the front display; control from the phone app over WiFi.
- 7-stage automatic cycle that advances when the compost reaches target
- Five temperature sensors with sensor fail-safe fallback chain
- Works with any compatible VFD (variable speed fan drive)
- Fresh-air and recirculation damper control with self-calibration
- Twelve alarms; power-cut recovery
- Phone app, desktop and web over WiFi and the cloud
About the CX710
CX710 runs the full Phase II cycle on its own: leveling, heat-up, pasteurization, conditioning and cool-down. It reads five temperature sensors, steers the fan and the fresh-air and recirculation dampers, and keeps going through power cuts.
Live readings show on the front display, and you run it from your phone or computer over WiFi and the Contol-X cloud. Press START in the app and the controller works through each stage, moving on when the compost actually reaches the target.
Features
- 7-stage automatic cycle that advances when the compost reaches target
- Five temperature sensors with sensor fail-safe fallback chain
- Works with any compatible VFD (variable speed fan drive)
- Fresh-air and recirculation damper control with self-calibration
- Twelve alarms; power-cut recovery
- Phone app, desktop and web over WiFi and the cloud
- Leveling: the fan circulates until air-in and air-out temperatures even out
- Heat-up: fan speed is trimmed to hold a steady climb towards 58 °C
- Pasteurize: hold timer (6 h by default) runs only while both compost probes are at target
- Condition: controlled ramp-down, then a long hold for ammonia clearance
- Cool-down: fresh air brings the compost down to room temperature at a steady rate
- Done: fan and damper park — compost is ready for spawning
Technical specifications
| Model | CX710 |
|---|---|
| Controller | Contol-X Phase 2 mushroom compost controller |
| Temperature inputs | 5 × temperature sensors |
| Damper actuator | Fresh-air and recirculation damper control |
| Fan drive | Any compatible VFD |
| Operator panel | Generic HMI display (status and readings) |
| Network | WiFi connectivity |
| Cloud | Android / iOS · Desktop · Web |
| Configuration | 7 stages × 12 setpoints, alarm limits, probe calibration — stored in flash |
| Electrical protection | Input/output voltage polarity protection |
| Warranty | 1-year Contol-X warranty |
What's included
- CX710 controller with display panel
Where it is used
- Mushroom compost Phase II tunnels
- Farms that want app control over WiFi
Frequently asked questions
How does the controller know when to move to the next stage?
It moves on when the compost actually reaches the target temperature — not after a fixed clock time. Every target, duration and ramp rate is a factory default you can change per tunnel.
What happens if a temperature probe breaks?
A broken probe never stops the batch. Each probe is checked for open or shorted wiring every half second and control moves down a fallback chain automatically.
What happens after a power cut?
The stage, elapsed time, hold timers and all settings are saved. When power returns the controller restores the stage, restarts the fan and damper and continues the countdown.
Can I run it from my phone?
Yes. The Contol-X app shows every probe, the stage and the hold countdown, and lets you start, stop, hold or move to the next stage and edit setpoints.
Do you supply outside India?
Yes. Contol-X controllers are shipped worldwide, with remote setup support over video call and WhatsApp.
Let’s automate your farm
Tell us about your rooms and equipment — we reply within 24 hours with the right setup and a quotation. India and worldwide.


